• 0

CarPro HydrO2 Lite


CarPro HydrO2 Lite is ready to use, true wipe-less sealant!



CarPro HydrO2 Lite

CarPro HydrO2 Lite is a ready to use, pre diluted spray and rinse touch-less sealant. Simply spray an even coat over 1/4 of the car at a time with little overlap, then rinse and let the pressure from the water accelerate the bonding between Hydro2 and the surface of your vehicle to give it a long lasting water and solvent protection with the added benefit of Ultra Violet protection.

Ready to use
Instantly significantly enhances gloss and depth while increasing smoothness
Easy to use in nearly any environment
Incredibly versatile and can be used on nearly any surface
No cure time necessary
Protects against harmful UV rays
Lasts about 3 months

1. Do NOT apply HydrO2 in the sun or to a hot surface! Applying in this manner may cause streaks that do not wipe off easily.
2. In shaded location or shop wash your vehicle and remove any dirt from the surfaces. (Use CarPro Reset)
3. Surface must be well cleaned from soap residue and left wet with water.
4. Spray fine mist of HydrO2 on no more than 1/4 of vehicle before rinsing. Very little is needed and no overlap is needed.
5. From time you start spraying a section to rinsing off should be approximately 30 seconds or less.
6. Immediately rinse well with strong water nozzle.
7. Repeat steps 4-6 on the next section of the vehicle rinsing well before moving to next section.
8. Finish by “flood rinsing” the vehicle without a spray nozzle to push all the water off from top down.
9. Dry any remaining water by blowing off or with the use of a clean Dry Me Crazy Microfiber towel

Additional information

Additional Information

Weight N/A
Dimensions N/A
Choose a size

1 Liter

Reviews (0)


There are no reviews yet.

Be the first to review “CarPro HydrO2 Lite”